[1]朱旭东,薛莹莹,张苏俊,等. 焊接时间和氯化铜处理对木榫焊接性能的影响机制[J].西北林学院学报,2019,34(5):231-239.[doi:10.3969/j.issn.1001-7461.2019.05.36]
　ZHU Xu-dong,XUE Ying-ying,ZHANG Su-jun,et al. Influence Mechanisms of Welding Time and CuCl2 Treatment on the Weldability of Dowels[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2019,34(5):231-239.[doi:10.3969/j.issn.1001-7461.2019.05.36]
点击复制

 焊接时间和氯化铜处理对木榫焊接性能的影响机制()
分享到：

《西北林学院学报》[ISSN:1001-7461/CN:61-1202/S]

卷:
第34卷
期数:
2019年第5期
页码:
231-239
栏目:
出版日期:
2019-09-30

文章信息/Info

Title:
 Influence Mechanisms of Welding Time and CuCl2 Treatment on the Weldability of Dowels
文章编号:
1001-7461(2019)05-0231-09
作者:
 朱旭东1; 2; 薛莹莹1; 张苏俊1; 沈杰1; 高颖2*
 （1.扬州工业职业技术学院，江苏 扬州 225100；2.北京林业大学，北京 100083）
Author(s):
 ZHU Xu-dong1; 2; XUE Ying-ying1; ZHANG Su-jun1; SHEN Jie1; GAO Ying2*
 （1.Yangzhou Polytechnic Institute,Yangzhou 225100,Jiangsu,China; 2.Beijing Forestry University,Beijing 100083,China）
关键词:
 ; 焊接时间; 氯化铜处理; 旋转焊接; 抗拉拔力; 焊接机制; 木榫焊接
Keywords:
 ; welding time;  CuCl2 treatment;  rotation welding;  pullout resistance;  welding mechanism;  the Weldability of dowels
分类号:
S781.65
DOI:
10.3969/j.issn.1001-7461.2019.05.36
文献标志码:
A
摘要:
 选取国产落叶松作为木榫旋转焊接基材，采用氯化铜浸渍桦木木榫，分析焊接时间和氯化铜处理对焊接性能的影响机制。结果表明：1)未处理试验组焊接时间3 s的试件抗拉拔力平均值分别高于5 s和7 s试件28.33%、87.12%；氯化铜浸渍处理试验组焊接时间3 s的试件抗拉拔力平均值分别高于5 s和7 s试件61.06%、130.49%；同样的焊接时间条件下，氯化铜浸渍处理试验组焊接时间3 s比未处理试验组高68.28%，焊接时间5 s高34.08%，焊接时间7 s高36.62%。2)未处理试验组不同焊接时间界面最高温度和深度之间均符合线性关系，氯化铜浸渍处理试验组焊接界面最高温度低于未处理焊接界面。3)采用FTIR对未处理木榫与界面、氯化铜浸渍处理木榫与界面的对比分析，发现桦木圆棒榫在经过氯化铜浸渍处理后可能发生了半纤维素和纤维素的酸水解，半纤维素、无定型物质等在焊接过程中均发生了热解，同时有大量物质氧化形成C-O和C=O，随着焊接时间的延长，木材组分的热解程度增加。木榫旋转焊接的机理是焊接过程中半纤维素和无定型物质热解熔融并包覆纤维形成焊接界面层。氯化铜浸渍处理的增强机制为氯化铜浸渍处理可能引起半纤维素和纤维素的酸水解，促进焊接过程中木材组分的解聚、热解形成熔融物质。
Abstract:
 In this paper,welded specimens were manufactured by rotation welding with Betula wood dowel and Larch substrate.Wood dowels were pretreated by immersing in CuCl2 solution.The influence mechanisms of welding time and CuCl2 treatment on the weldabilities of the dowels were studied.The results showed that 1) the pullout resistance of the untreated woods with welding time 3 s was 28.33% and 87.12% higher than that those with welding time 5 s and 7 s,respectively.For the CuCl2 treated groups,the pullout resistance of welding time 3 s was 61.06% and 130.49% higher than those of welding time 5 s and 7 s,respectively.Under the same welding time 3 s,5 s and 7 s,the pullout resistance of CuCl2 treated groups was 68.28%,34.08% and 36.62% higher than those of untreated groups,respectively.2) The linear relationship existed between the highest temperature of the welding interface and depth for untreated groups.The highest temperatures of welding interface for CuCl2 treated groups were lower than those of untreated groups.3) The analyses of chemical groups for wood dowel and welding interface conducted by FTIR indicated that acid hydrolysis of hemicellulose and cellulose of wood dowel might occur after the immersing process.The pyrolysis of hemicellulose and amorphous substance might also occur during the welding process,with the formation of C-O and C=O oxygen-containing materials.With the extending of welding time,the degree of pyrolysis of wood components increased.The mechanism of wood dowels welded into substrates was that fiber was covered by the molten materials of pyrolysed hemicellulose and amorphous materials in the welding interface during the welding process.The enhancement mechanism of wood dowel treated with CuCl2 was that acid hydrolysis of hemicellulose and cellulose of wood dowel might occur during immersion which may promote the formation of molten materials by the depolymerization and pyrolysis of wood constituents.

相似文献/References:

[1]李亚藏,梁彦兰,王庆成. 铅对山梨和山荆子光合作用和叶绿素荧光特性的影响[J].西北林学院学报,2012,27(05):21.
　LI Ya-cang,LIANG Yan-lan,WANG Qing-cheng. Influence of Pb on Photosynthesis and Chlorophyll Fluorescence Characteristics in Pyrus ussuriensis and Malus baccata [J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(5):21.
[2]张小咏,李佳,杨艳昭,等. 基于SWAT模型的长江源区径流模拟[J].西北林学院学报,2012,27(05):38.
　ZHANG Xiao-yong,LI Jia,YANG Yan-zhao,et al. Runoff Simulation of the Catchment of the Headwaters of the Yangtze River Based on SWAT Model[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(5):38.
[3]杨红旗,陈广辉,王金林. PVAc改性酚醛树脂制备铝木复合材料研究[J].西北林学院学报,2013,28(01):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
　YANG Hong-qi,CHEN Guang-hui,WANG Jin-lin. PF Adhesive Modified by PVAc for Manufacturing Technology of Decorative Fiberboard with Aluminum Foils[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
[4]江涛,李秀荣,谢延军,等. 微波预处理对巨尾桉木材渗透性的影响[J].西北林学院学报,2013,28(01):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
　JIANG Tao,LI Xiu-rong,XIE Yan-jun,et al. Effects of Microwave Pretreatment on the Permeability of Eucalyptus grandis×Eucalyptus urophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
[5]牛晓霆,王逢瑚,曹新民. 明清家具匠师原木下料的工艺原则及措施[J].西北林学院学报,2013,28(01):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
　NIU Xiao-ting,WANG Feng-hu,CAO Xin-min. Techniques and Principles of Log Cuttings of Furniture Makers in Ming and Qing Dynasties[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
[6]吕金阳,覃卓凯,舒辉,等. 银杉木材构造美学价值[J].西北林学院学报,2013,28(01):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
　LV Jin-yang,QIN Zhuo-kai,SHU Hui,et al. Esthetical Values in Wood Structure of Cathaya argyrophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
[7]杨艳红,张海敏,孙景荣. 基于传统文化视角的现代家具设计探析[J].西北林学院学报,2013,28(01):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
　YANG Yan-hong,ZHANG Hai-min,SUN Jing-rong. Study of Modern Furniture Design Based on Traditional Culture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
[8]黄圣游,叶喜. 新中式家具“中式”传统的界定[J].西北林学院学报,2013,28(01):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
　HUANG Sheng-You,YE Xi. Definition of Traditional Element in New Chinese Style Furniture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
[9]韩维生,赵明磊,王宏斌. 基于阈限理论的设计尺度体系[J].西北林学院学报,2013,28(01):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
　HAN Wei-sheng,ZHAO Ming-lei,WANG Hong-bin. Design Scale System Based on Threshold Theory[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
[10]宋杰,侯建军,申黎明. 按摩椅按摩头包覆层对按摩舒适性的影响[J].西北林学院学报,2013,28(01):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
　SONG Jie,HOU Jian-jun,SHEN Li-ming. Influence of Massager Coat Layer of Massage Chairs on the Degree of Comfort[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]

备注/Memo

备注/Memo:
 收稿日期：2018-10-16修回日期：2019-01-03
基金项目：国家自然科学基金(31901252)；江苏省基础研究计划（自然科学基金）青年基金：木梁/柱无胶旋转摩擦焊接受力机理及设计理论研究（BK20180276）；江苏省高等学校自然科学研究面上项目：旋转焊接竹/木屋架受力机理及其设计理论研究（18KJB220012）。
作者简介：朱旭东，男，博士，讲师，研究方向：木质工程复合材料。E-mail:zhuxudong5008@163.com
*通信作者：高颖，女，博士，副教授，研究方向：木质复合工程材料。E-mail:gaoying@bjfu.edu.cn
更新日期/Last Update: