[1]马岩,王刚,宋文龙*,等. 小径木梯形板锯刨机结构设计与研究[J].西北林学院学报,2020,35(2):266-272.[doi:10.3969/j.issn.1001-7461.2020.02.40]
　MA Yan,WANG Gang,SONG Wen-long*,et al. Structural Design and Research of Sawing and Planing Machine for Processing Trapezoidal Plate from Small Diameter Wood[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2020,35(2):266-272.[doi:10.3969/j.issn.1001-7461.2020.02.40]
点击复制

 小径木梯形板锯刨机结构设计与研究()
分享到：

《西北林学院学报》[ISSN:1001-7461/CN:61-1202/S]

卷:
第35卷
期数:
2020年第2期
页码:
266-272
栏目:
出版日期:
2020-03-31

文章信息/Info

Title:
 Structural Design and Research of Sawing and Planing Machine for Processing Trapezoidal Plate from Small Diameter Wood
文章编号:
1001-7461(2020)02-0266-07
作者:
 马岩; 王刚; 宋文龙*; 杨春梅; 曲文; 蒋婷; 缪骞
 (东北林业大学 林业与木工机械工程技术中心，黑龙江 哈尔滨 150040)
Author(s):
 MA Yan; WANG Gang; SONG Wen-long*; YANG Chun-mei; QU Wen; JIANG Ting; MIAO Qian
 (Forestry and Woodworking Machinery Engineering Technology Center,Northeast Forestry University,Harbin 150040,Heilongjiang,China)
关键词:
 ; 小径木; 锯切; 刨切; 结构设计
Keywords:
 ; small diameter wood;  sawing;  planing;  structure design
分类号:
S776
DOI:
10.3969/j.issn.1001-7461.2020.02.40
文献标志码:
A
摘要:
 针对目前市面上加工小径木的机器加工精度低、效率不高、出材率低等问题，分析提高小径木梯形板出材率、加工效率及加工精度的设计方法，通过新的设计方法制定了新的加工工艺。结合工艺分析设计了小径木梯形板锯刨机的总体结构，可以对小径木梯形板进行锯切、粗刨、精刨加工。在对其核心组件锯切组件与刨削组件的加工原理进行分析的基础上，设计了锯切组件结构与刨削组件结构。通过导入锯切主轴SolidWorks的三维模型，利用ANSYS对其锯切主轴进行静力学分析，得到锯切主轴的应力、应变和变形云图，其中最大应力值为7.435 MPa、最大应变值为0.042 316 mm/m、最大变形量为0.002 178 8 mm，其强度、刚度及变形量均在许用范围内，仿真验证了锯切主轴的设计的合理性。
Abstract:
 Aiming at solving the problems of low precision,low efficiency and low yield of wood processing machines available in the market when they are used to process small diameter lumber,a new machine-designing method was discussed to improve the yield,machining efficiency and precision during processing trapezoidal plate from small diameter lumber,from which the new processing technology was formulated.The overall structure of the machine was designed based on process analysis.The machine could accomplish sawing,rough and fine planing for processing trapezoidal plate from small diameter lumber.Based on the analysis of the machining principle of the sawing and planing components of its core components,the structures of the sawing and planing components were designed.By introducing the three-dimensional model of SolidWorks of sawing spindle and using ANSYS to carry out static analysis of its sawing spindle,the stress,strain and deformation nephograms of sawing spindle were obtained.The maximum stress value was 7.435 MPa,the maximum strain value was 0.042 316 mm/m and the maximum deformation was 0.002 178 8 mm.Therefore,the strength,stiffness and deformation of sawing spindle were within the allowable range.The simulation verified the rationality of the design of saw cutting spindle.

相似文献/References:

[1]李亚藏,梁彦兰,王庆成. 铅对山梨和山荆子光合作用和叶绿素荧光特性的影响[J].西北林学院学报,2012,27(05):21.
　LI Ya-cang,LIANG Yan-lan,WANG Qing-cheng. Influence of Pb on Photosynthesis and Chlorophyll Fluorescence Characteristics in Pyrus ussuriensis and Malus baccata [J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(2):21.
[2]张小咏,李佳,杨艳昭,等. 基于SWAT模型的长江源区径流模拟[J].西北林学院学报,2012,27(05):38.
　ZHANG Xiao-yong,LI Jia,YANG Yan-zhao,et al. Runoff Simulation of the Catchment of the Headwaters of the Yangtze River Based on SWAT Model[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(2):38.
[3]杨红旗,陈广辉,王金林. PVAc改性酚醛树脂制备铝木复合材料研究[J].西北林学院学报,2013,28(01):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
　YANG Hong-qi,CHEN Guang-hui,WANG Jin-lin. PF Adhesive Modified by PVAc for Manufacturing Technology of Decorative Fiberboard with Aluminum Foils[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(2):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
[4]江涛,李秀荣,谢延军,等. 微波预处理对巨尾桉木材渗透性的影响[J].西北林学院学报,2013,28(01):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
　JIANG Tao,LI Xiu-rong,XIE Yan-jun,et al. Effects of Microwave Pretreatment on the Permeability of Eucalyptus grandis×Eucalyptus urophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(2):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
[5]牛晓霆,王逢瑚,曹新民. 明清家具匠师原木下料的工艺原则及措施[J].西北林学院学报,2013,28(01):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
　NIU Xiao-ting,WANG Feng-hu,CAO Xin-min. Techniques and Principles of Log Cuttings of Furniture Makers in Ming and Qing Dynasties[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(2):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
[6]吕金阳,覃卓凯,舒辉,等. 银杉木材构造美学价值[J].西北林学院学报,2013,28(01):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
　LV Jin-yang,QIN Zhuo-kai,SHU Hui,et al. Esthetical Values in Wood Structure of Cathaya argyrophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(2):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
[7]杨艳红,张海敏,孙景荣. 基于传统文化视角的现代家具设计探析[J].西北林学院学报,2013,28(01):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
　YANG Yan-hong,ZHANG Hai-min,SUN Jing-rong. Study of Modern Furniture Design Based on Traditional Culture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(2):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
[8]黄圣游,叶喜. 新中式家具“中式”传统的界定[J].西北林学院学报,2013,28(01):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
　HUANG Sheng-You,YE Xi. Definition of Traditional Element in New Chinese Style Furniture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(2):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
[9]韩维生,赵明磊,王宏斌. 基于阈限理论的设计尺度体系[J].西北林学院学报,2013,28(01):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
　HAN Wei-sheng,ZHAO Ming-lei,WANG Hong-bin. Design Scale System Based on Threshold Theory[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(2):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
[10]宋杰,侯建军,申黎明. 按摩椅按摩头包覆层对按摩舒适性的影响[J].西北林学院学报,2013,28(01):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
　SONG Jie,HOU Jian-jun,SHEN Li-ming. Influence of Massager Coat Layer of Massage Chairs on the Degree of Comfort[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(2):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
[11]杨春梅,曲文,宁礼佳*,等. 小径木单板双面刨切机自动进出料台主轴结构的设计研究[J].西北林学院学报,2020,35(3):266.[doi:10.3969/j.issn.1001-7461.2020.03.42]
　YANG Chun-mei,QU Wen,NING Li-jia*,et al. Design and Research of Spindle Structure of Automatic Feeding and Unloading Table for Small-Size Wood Veneer Double-sided Planer[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2020,35(2):266.[doi:10.3969/j.issn.1001-7461.2020.03.42]

备注/Memo

备注/Memo:
 收稿日期：2019-06-21修回日期：2019-07-30
基金项目：国家重点研发计划“小径材多界面加工关键装备研究”（2018YFD06003054）；黑龙江省应用技术研究与开发计划项目（GA19A402）。
作者简介：马岩，男，教授，研究方向：林业与木工机械设计。E-mail:myan@vip.163.com
*通信作者：宋文龙，男，教授，研究方向：林业与木工机械设计。E-mail:wlsong139@126.com
更新日期/Last Update: