[1]周凡,高鑫,付宗营,等. 大径级火力楠木材干燥特性和干燥工艺研究[J].西北林学院学报,2021,36(1):215-220.[doi:10.3969/j.issn.1001-7461.2021.01.31]
　ZHOU Fan,GAO Xin,FU Zong-ying,et al. Drying Characteristics and Drying Technology of Large-diameter Michelia macclurei Wood[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2021,36(1):215-220.[doi:10.3969/j.issn.1001-7461.2021.01.31]
点击复制

 大径级火力楠木材干燥特性和干燥工艺研究()
分享到：

《西北林学院学报》[ISSN:1001-7461/CN:61-1202/S]

卷:
第36卷
期数:
2021年第1期
页码:
215-220
栏目:
出版日期:
2021-01-31

文章信息/Info

Title:
 Drying Characteristics and Drying Technology of Large-diameter Michelia macclurei Wood
文章编号:
1001-7461(2021)01-0215-06
作者:
 周凡; 高鑫; 付宗营; 高玉发; 周永东*
 (中国林业科学研究院 木材工业研究所，北京 100091)
Author(s):
 ZHOU Fan; GAO Xin; FU Zong-ying; GAO Yu-fa; ZHOU Yong-dong*
 (Research Institution of Wood Industry,Chinese Academy of Forestry,Beijing 100091,China)
关键词:
 ; 火力楠; 百度试验法; 干燥特性; 干燥基准; 干燥质量
Keywords:
Michelia macclurei;  100℃ test;  drying characteristics;  drying schedule;  drying quality
分类号:
S782.31
DOI:
10.3969/j.issn.1001-7461.2021.01.31
文献标志码:
A
摘要:
 采用百度试验法研究木材干燥特性，利用小型木材干燥试验机分别对25 mm和40 mm厚锯材进行常规干燥试验研究锯材干燥工艺基准。结果表明，火力楠木材的百度干燥缺陷程度较轻，初期开裂等级为2，扭曲变形等级为2，截面变形等级为1，内裂等级为1；木材的干燥速度中等，等级为3。木材含水率为15%时的密度为0.679 g·cm-3，属中等。木材的差异干缩很小，干燥过程产生开裂的趋势较小。采用制定的干燥基准对锯材进行常规干燥，25 mm厚锯材从初含水率87.9%干至终含水率9.1%，干燥用时169.0 h (7.0 d)，平均干燥速率0.47%·h-1；40 mm厚锯材从87.5%干至8.5%，干燥用时341.0 h (14.2 d)，平均干燥速率0.23%·h-1。2种厚度干燥锯材的平均最终含水率、干燥均匀度、厚度上含水率偏差、残余应力以及可见干燥缺陷方面的指标，均达到了国家标准规定的锯材干燥质量二级及以上级别的要求。本研究编制的2种厚度火力楠锯材的干燥基准合理，可为实际木材的干燥生产提供科学依据。
Abstract:
 In order to promote the practical utilization of large-diameter Michelia macclurei wood,its drying characteristics and drying technology were studied.The drying characteristics were determined using the 100℃ test method.The drying technologies of 25 mm and 40 mm thick timber were studied by conventional drying experiments on a small-scale wood drying kiln.The results showed that the drying defects of the M.macclurei wood in 100℃ test were not serious.The grades of initial cracking,twist deformation,cross-sectional deformation and internal cracking of the wood were 2,2,1,and 1,respectively.The wood was moderately easy to dry with the drying speed grade of 3.The wood was a medium density hardwood with the density at 15% moisture content of 0.679 g·cm-3.The ratio of tangential shrinkage to radial shrinkage of the wood was very small,indicating its tendency of cracking in drying process would be very small.For conventional drying of 25 mm thick timber,the moisture content decreased from 87.9% to 9.1% with the drying period of 169.0 h (7.0 d) and the average drying rate of 0.47%·h-1.The moisture content decreased from 87.5% to 8.5% with the drying period of 341.0 h (14.2 d) and the average drying rate of 0.23%·h-1 for the timber of 40 mm in thickness.The final average moisture content,drying evenness,moisture content deviation in thickness,residual drying stress,and visible drying defects of the dried 25 mm and 40 mm thick timbers all met the requirements of the second and above grade drying quality of sawn timber in the China National Standard.Thus the proposed drying schedules are reasonable,and these provide technical support for the actual production of kiln drying of the M.macclurei wood to ensure drying quality.

相似文献/References:

[1]李亚藏,梁彦兰,王庆成. 铅对山梨和山荆子光合作用和叶绿素荧光特性的影响[J].西北林学院学报,2012,27(05):21.
　LI Ya-cang,LIANG Yan-lan,WANG Qing-cheng. Influence of Pb on Photosynthesis and Chlorophyll Fluorescence Characteristics in Pyrus ussuriensis and Malus baccata [J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(1):21.
[2]张小咏,李佳,杨艳昭,等. 基于SWAT模型的长江源区径流模拟[J].西北林学院学报,2012,27(05):38.
　ZHANG Xiao-yong,LI Jia,YANG Yan-zhao,et al. Runoff Simulation of the Catchment of the Headwaters of the Yangtze River Based on SWAT Model[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(1):38.
[3]杨红旗,陈广辉,王金林. PVAc改性酚醛树脂制备铝木复合材料研究[J].西北林学院学报,2013,28(01):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
　YANG Hong-qi,CHEN Guang-hui,WANG Jin-lin. PF Adhesive Modified by PVAc for Manufacturing Technology of Decorative Fiberboard with Aluminum Foils[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(1):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
[4]江涛,李秀荣,谢延军,等. 微波预处理对巨尾桉木材渗透性的影响[J].西北林学院学报,2013,28(01):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
　JIANG Tao,LI Xiu-rong,XIE Yan-jun,et al. Effects of Microwave Pretreatment on the Permeability of Eucalyptus grandis×Eucalyptus urophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(1):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
[5]牛晓霆,王逢瑚,曹新民. 明清家具匠师原木下料的工艺原则及措施[J].西北林学院学报,2013,28(01):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
　NIU Xiao-ting,WANG Feng-hu,CAO Xin-min. Techniques and Principles of Log Cuttings of Furniture Makers in Ming and Qing Dynasties[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(1):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
[6]吕金阳,覃卓凯,舒辉,等. 银杉木材构造美学价值[J].西北林学院学报,2013,28(01):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
　LV Jin-yang,QIN Zhuo-kai,SHU Hui,et al. Esthetical Values in Wood Structure of Cathaya argyrophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(1):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
[7]杨艳红,张海敏,孙景荣. 基于传统文化视角的现代家具设计探析[J].西北林学院学报,2013,28(01):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
　YANG Yan-hong,ZHANG Hai-min,SUN Jing-rong. Study of Modern Furniture Design Based on Traditional Culture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(1):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
[8]黄圣游,叶喜. 新中式家具“中式”传统的界定[J].西北林学院学报,2013,28(01):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
　HUANG Sheng-You,YE Xi. Definition of Traditional Element in New Chinese Style Furniture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(1):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
[9]韩维生,赵明磊,王宏斌. 基于阈限理论的设计尺度体系[J].西北林学院学报,2013,28(01):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
　HAN Wei-sheng,ZHAO Ming-lei,WANG Hong-bin. Design Scale System Based on Threshold Theory[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(1):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
[10]宋杰,侯建军,申黎明. 按摩椅按摩头包覆层对按摩舒适性的影响[J].西北林学院学报,2013,28(01):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
　SONG Jie,HOU Jian-jun,SHEN Li-ming. Influence of Massager Coat Layer of Massage Chairs on the Degree of Comfort[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(1):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
[11]王泽坤,龙涛,夏俊伟,等. 火力楠木材涂饰聚氨酯清漆工艺研究[J].西北林学院学报,2016,31(1):265.[doi:10.3969/j.issn.1001-7461.2016.01.46]
　WANG Ze-kun,LONG Tao,XIA Jun-wei,et al. Coating Process of Polyurethane Varnish for Michelia macclurei Timber[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2016,31(1):265.[doi:10.3969/j.issn.1001-7461.2016.01.46]
[12]韦鹏练,刘晓玲,符韵林*. 火力楠人工林木材物理力学性质的研究[J].西北林学院学报,2020,35(1):252.[doi:10.3969/j.issn.1001-7461.2020.01.38]
　WEI Peng-lian,LIU Xiao-ling,FU Yun-lin*. Physical and Mechanical Properties of Michelia macclurei Plantation Wood[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2020,35(1):252.[doi:10.3969/j.issn.1001-7461.2020.01.38]
[13]周凡,高鑫,付宗营,等. 火力楠心材与边材颜色和物理力学性质[J].西北林学院学报,2021,36(4):191.[doi:10.3969/j.issn.1001-7461.2021.04.27]
　ZHOU Fan,GAO Xin,FU Zong-ying,et al. Variations of Color,Physical and Mechanical Properties in Heartwood and Sapwood of Michelia macclurei[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2021,36(1):191.[doi:10.3969/j.issn.1001-7461.2021.04.27]

备注/Memo

备注/Memo:
 收稿日期：2020-02-25修回日期：2020-03-20
基金项目：中央级公益性科研院所基金：火力楠、黑木相思无性系高效培育和木材干燥技术（CAFYBB2018ZB004）。
作者简介：周凡，博士，助理研究员。研究方向：木材物理与干燥。E-mail：zhoufanzju@163.com
*通信作者：周永东，博士，研究员。研究方向：木材物理与干燥。E-mail：zhouyd@caf.ac.cn
更新日期/Last Update: