[1]董宏敢,王传贵,王祥,等. 施胶量对单板造纸污泥复合板性能的影响[J].西北林学院学报,2014,29(06):226-229.[doi:doi:10.3969/j.issn.1001-7461.2014.06.43]
　DONG Hong-gan,WANG Chuan-gui,WANG Xiang,et al. Influence of Adhesive Consumption on the Properties of Veneer-Sludge Composite Board[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2014,29(06):226-229.[doi:doi:10.3969/j.issn.1001-7461.2014.06.43]
点击复制

 施胶量对单板造纸污泥复合板性能的影响()
分享到：

《西北林学院学报》[ISSN:1001-7461/CN:61-1202/S]

卷:
第29卷
期数:
2014年06期
页码:
226-229
栏目:
出版日期:
2014-11-30

文章信息/Info

Title:
 Influence of Adhesive Consumption on the Properties of Veneer-Sludge Composite Board
文章编号:
1001-7461(2014)06-0226-04
作者:
 董宏敢; 王传贵;  王祥; 涂道伍;  刘盛全*
 （安徽农业大学 林学与园林学院，安徽 合肥 230036）
Author(s):
 DONG Hong-gan;  WANG Chuan-gui;  WANG Xiang;  TU Dao-wu;  LIU Sheng-quan*
 （College of Forestry and Landscape Architecture, Anhui Agricultural University, Hefei, Anhui 230036, China）
关键词:
 ; 施胶量; 造纸污泥; 杨木单板; 复合板性能
Keywords:
 ; adhesive consumption;  paper sludge; poplar veneer; property of composite board
分类号:
S781.65
DOI:
doi:10.3969/j.issn.1001-7461.2014.06.43
文献标志码:
A
摘要:
 以竹浆造纸污泥为原料，杨木单板为表面增强单元、UF为胶粘剂制备新型复合材料。结果表明，单板造纸污泥复合板材较纯污泥板弹性模量、内结合强度、表面胶合强度等力学指标增加明显,可满足相关标准对板材的质量要求。从强度与环保要求两方面综合考虑，污泥施胶量以13%、单板的施胶量以150 g·cm-2为宜。
Abstract:
 This paper presented the manufacturing process of a new composite material by using paper mill sludge, poplar veneers and urea formaldehyde (UF). Compared with that made without poplar veneer, the board exhibited the excellent performances in elasticity modulus，internal bond strength and surface bond strength. Considering the aspects of strength and environmental requirement, the UF consumption for paper sludge was 13%, for poplar veneer: 50 g·cm-2.

参考文献/References:

 [1]张祁年. 硫酸盐化学竹浆生产工艺的探讨[J]. 天津造纸,1992（2）：1-5.
[2]何忠良,何广钊. 低浓亚硫酸氢盐法蒸煮竹浆[J]. 造纸科学与技术,2001,20(2):49-51.
[3]王传贵，江泽慧，刘贤淼,等. 造纸污泥资源化利用研究进展[J].中国造纸，2009，28（1）：64-67.
WANG C G, JIANG Z H,LIU X M, et al. Research advance of utilization of paper sludge[J]. China Pulp & Paper,2009，28（1）：64-67．(in Chinese)
[4]刘贤淼,江泽慧,费本华,等.木纤维增强造纸脱墨污泥纤维板研究[J].材料导报，2010,24（15）：418-420.
[5]王传贵，江泽慧，刘贤淼,等. 造纸污泥制造纤维板研究[J].中国造纸, 2009,28(6)：76-78.
WANG C G，JIANG Z H，LIU X M，et al．Study on fiberboard made from paper sludge[J]．China Pulp & Paper，2009，28(6)：76-78．(in Chinese)
[6]连海兰,曹云峰,唐景全. 杨木化机浆污泥/马尾松纤维复合板的制备及性能研究[J].南京林业大学学报：自然科学版，2012,36（4）：98-102.
LIAN H L，CAO Y F，TANG J Q，et al. Study on preparation and properties of fiberboard using APMP of poplar sludge and Pinus massoniana fiber composites[J]. Journal of Nanjing Forestry University：Natural Sciences Edition,2012,36（4）：98-102.(in Chinese)
[7]曹俊,肖刚,许啸,等. 木质素热解／炭化官能团演变与焦炭形成[J].东南大学学报：自然科学版,2012,42(1):83-87.
CAO J, XIAO G, XU X，et al．Functional groups evolvement and charcoal formation during lignin pyrolysis /carbonization[J]. Journal of Southeast University：Natural Science Edition , 2012,42(1):83-87．(in Chinese)
[8]庞敏. 造纸污泥制造中密度纤维板工艺研究[D]. 合肥：安徽农业大学，2008.
[9]储九荣.有机填料改性的无毒耐水脲醛树脂胶[J].化学与胶粘，1994（4）：176-177.
[10]张秀标,王传贵.竹造纸污泥润湿性和结晶度的研究[J].中国人造板，2011(5):12-15.
ZHANG X B， WANG C G．Wettability and crystallinity of bamboo paper mill sludge[J]．China Wood-Based Panels，2011(5):12-15．(in Chinese)
[11]武再彦,邱增处,任博文,等. 软木无胶胶合工艺研究[J].西北林学院学报 2013,28(6):178-181.
WU Z Y，QIU Z C，REN B W，et al. Processes of self-bonding corkboard[J]．Journal of Northwest Forestry University, 2013,28(6):178-181．(in Chinese)
[12]陈桂兰,张明连,赵尧森,等. CaCO3对增强聚丙烯合金性能影响的研究[J].上海塑料,2002(2):20-23.
[13]李东明,漆宗能.碳酸钙增强聚丙烯复合材料的断裂韧性[J].高分子材料科学与工程, 1991（2）：18-25.
[14]王勇,李瑞海,王贵恒. 无机填料同时增韧增强HDPE体系的界面相互作用[J].高等学校化学学报, 1994（8）：1253-1255.
[15]杜荣昵,高小铃,渠成,等.聚甲醛／弹性体／碳酸钙复合材料的研究[J]. 塑料工业, 2004,33(2):9-14.

相似文献/References:

[1]李亚藏,梁彦兰,王庆成. 铅对山梨和山荆子光合作用和叶绿素荧光特性的影响[J].西北林学院学报,2012,27(05):21.
　LI Ya-cang,LIANG Yan-lan,WANG Qing-cheng. Influence of Pb on Photosynthesis and Chlorophyll Fluorescence Characteristics in Pyrus ussuriensis and Malus baccata [J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(06):21.
[2]张小咏,李佳,杨艳昭,等. 基于SWAT模型的长江源区径流模拟[J].西北林学院学报,2012,27(05):38.
　ZHANG Xiao-yong,LI Jia,YANG Yan-zhao,et al. Runoff Simulation of the Catchment of the Headwaters of the Yangtze River Based on SWAT Model[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(06):38.
[3]杨红旗,陈广辉,王金林. PVAc改性酚醛树脂制备铝木复合材料研究[J].西北林学院学报,2013,28(01):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
　YANG Hong-qi,CHEN Guang-hui,WANG Jin-lin. PF Adhesive Modified by PVAc for Manufacturing Technology of Decorative Fiberboard with Aluminum Foils[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(06):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
[4]江涛,李秀荣,谢延军,等. 微波预处理对巨尾桉木材渗透性的影响[J].西北林学院学报,2013,28(01):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
　JIANG Tao,LI Xiu-rong,XIE Yan-jun,et al. Effects of Microwave Pretreatment on the Permeability of Eucalyptus grandis×Eucalyptus urophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(06):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
[5]牛晓霆,王逢瑚,曹新民. 明清家具匠师原木下料的工艺原则及措施[J].西北林学院学报,2013,28(01):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
　NIU Xiao-ting,WANG Feng-hu,CAO Xin-min. Techniques and Principles of Log Cuttings of Furniture Makers in Ming and Qing Dynasties[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(06):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
[6]吕金阳,覃卓凯,舒辉,等. 银杉木材构造美学价值[J].西北林学院学报,2013,28(01):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
　LV Jin-yang,QIN Zhuo-kai,SHU Hui,et al. Esthetical Values in Wood Structure of Cathaya argyrophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(06):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
[7]杨艳红,张海敏,孙景荣. 基于传统文化视角的现代家具设计探析[J].西北林学院学报,2013,28(01):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
　YANG Yan-hong,ZHANG Hai-min,SUN Jing-rong. Study of Modern Furniture Design Based on Traditional Culture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(06):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
[8]黄圣游,叶喜. 新中式家具“中式”传统的界定[J].西北林学院学报,2013,28(01):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
　HUANG Sheng-You,YE Xi. Definition of Traditional Element in New Chinese Style Furniture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(06):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
[9]韩维生,赵明磊,王宏斌. 基于阈限理论的设计尺度体系[J].西北林学院学报,2013,28(01):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
　HAN Wei-sheng,ZHAO Ming-lei,WANG Hong-bin. Design Scale System Based on Threshold Theory[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(06):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
[10]宋杰,侯建军,申黎明. 按摩椅按摩头包覆层对按摩舒适性的影响[J].西北林学院学报,2013,28(01):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
　SONG Jie,HOU Jian-jun,SHEN Li-ming. Influence of Massager Coat Layer of Massage Chairs on the Degree of Comfort[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(06):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
[11]孙玉慧,江泽慧*,刘焕荣,等. 竹定向刨花板指接工艺的研究[J].西北林学院学报,2018,33(5):219.[doi:10.3969/j.issn.1001-7461.2018.05.35]
　SUN Yu-hui,JIANG Ze-hui*,LIU Huan-rong,et al. Finger-jointing Technique of Bamboo Oriented Strand Board[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2018,33(06):219.[doi:10.3969/j.issn.1001-7461.2018.05.35]

备注/Memo

备注/Memo:
 收稿日期：2014-01-06修回日期：2014-04-04
基金项目：“十二五”国家科技支撑计划课题（2012BAD23B0204）。
作者简介：董宏敢，男，副教授，硕士，研究方向：生物质材料加工利用。E-mail: dhg@ahau.edu.cn
*通信作者：刘盛全，男，教授，博士生导师，研究方向：生物质材料高效利用。E-mail: liusq@ahau.edu.cn
更新日期/Last Update: