[1]汤正捷,关成,吴商,等. 刨花高温处理对水泥刨花板水化热和弯曲性能影响的研究[J].西北林学院学报,2019,34(5):195-201.[doi:10.3969/j.issn.1001-7461.2019.05.30]
　TANG Zheng-jie,GUAN Cheng,WU Shang,et al. Effects of High Temperature Treatment of Wood Chips on the Hydration Heat and Modulus of Rupture of Cement Particleboard[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2019,34(5):195-201.[doi:10.3969/j.issn.1001-7461.2019.05.30]
点击复制

 刨花高温处理对水泥刨花板水化热和弯曲性能影响的研究()
分享到：

《西北林学院学报》[ISSN:1001-7461/CN:61-1202/S]

卷:
第34卷
期数:
2019年第5期
页码:
195-201
栏目:
出版日期:
2019-09-30

文章信息/Info

Title:
 Effects of High Temperature Treatment of Wood Chips on the Hydration Heat and Modulus of Rupture of Cement Particleboard
文章编号:
1001-7461(2019)05-0195-07
作者:
 汤正捷1; 2; 关成1; 吴商1; 刘李花1; 周定国2
 （1.西南林业大学 材料科学与工程学院，云南 昆明 650224；2.南京林业大学 材料科学与工程学院，江苏 南京 210037）
Author(s):
 TANG Zheng-jie1; 2; GUAN Cheng1; WU Shang1; LIU Li-hua1; ZHOU Ding-guo2
 （1.College of Materials Science and Engineering,Southwest Forestry University,Kunming 650224,Yunnan,China; 2.College of Materials Science and Engineering,Nanjing Forestry University,Nanjing 210037,Jiangsu,China）
关键词:
 ; 水泥刨花板; 水化热; 高温处理
Keywords:
 ; cement particleboard;  hydration heat;  high temperature treatment
分类号:
S781.63
DOI:
10.3969/j.issn.1001-7461.2019.05.30
文献标志码:
A
摘要:
 水泥刨花板性能优良、耐水防火，植物原料刨花对水泥的固化具有一定的阻凝作用。采用高温干燥技术，探讨了刨花不同的高温处理条件（处理温度：130、170、210℃，处理时间：0.5、1.5、2.5 h）对刨花和水泥混合物水化热以及水泥刨花板力学性能的影响。结果表明：1)刨花高温处理对刨花与水泥相容性的改变有明显的作用。刨花处理条件为210℃、2.5 h时，水化温度上升最高，达到35.0℃比未处理刨花升高7.4℃，但是达到最高温的时间为1 320 min，并不是最短。刨花处理条件为170℃、2.5 h时，相容性系数CT和CA分别为25.6%和104.0％，是所有处理条件中最好的。2)刨花高温处理对水泥刨花板所有龄期（分别养护7、14 d和28 d）的静曲强度总体呈现增强的趋势。在刨花处理条件为170℃、2.5 h时，水泥刨花板28 d的静曲强度（终强度）最大达到8.2 MPa，比刨花未处理时增加了4.7 MPa，提升了134%。
Abstract:
 Cement particleboard is a kind of building material with excellent performance such as water and fire resistance,which will have broad aspects in application.In the production of cement particleboard,the wood material will negatively affect the hardening of the cement.In order to solve this problem,this paper discussed the effects of the different high temperature treatments (temperature：130,170,and 210℃,time：0.5,1.5 h,and 2.5 h) of wood material on the properties of cement particleboard.The results showed that 1) the high temperature treatment of wood chips had obvious effects on the compatibility between wood and cement.The effect the treatment varied according to different evaluation methods.When the processing conditions were 210℃ and 2.5 h,the highest hydration temperature rose to 35.3℃,3.4℃ higher than untreated wood chips.But the time to achieve the maximum hydration temperature prolonged to 1 320 min.When the conditions were 170℃ and 2.5 h,the compatibility coefficient CT and CA were 25.6% and 104.0%,respectively,which were the best among all treatment conditions.2) The high temperature treatment of wood chips showed an increasing tendency to the static bending intensity of cement particleboard at all curing ages (7,14,and 28 days respectively).After 28 days of maintenance,cement particleboard was usually considered to reach the ultimate strength.The maximum modulus of rupture of cement particleboard reached 8.2 MPa and increased by 134%,when the processing condition of wood chips was 170℃ and 2.5 h.

相似文献/References:

[1]李亚藏,梁彦兰,王庆成. 铅对山梨和山荆子光合作用和叶绿素荧光特性的影响[J].西北林学院学报,2012,27(05):21.
　LI Ya-cang,LIANG Yan-lan,WANG Qing-cheng. Influence of Pb on Photosynthesis and Chlorophyll Fluorescence Characteristics in Pyrus ussuriensis and Malus baccata [J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(5):21.
[2]张小咏,李佳,杨艳昭,等. 基于SWAT模型的长江源区径流模拟[J].西北林学院学报,2012,27(05):38.
　ZHANG Xiao-yong,LI Jia,YANG Yan-zhao,et al. Runoff Simulation of the Catchment of the Headwaters of the Yangtze River Based on SWAT Model[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(5):38.
[3]杨红旗,陈广辉,王金林. PVAc改性酚醛树脂制备铝木复合材料研究[J].西北林学院学报,2013,28(01):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
　YANG Hong-qi,CHEN Guang-hui,WANG Jin-lin. PF Adhesive Modified by PVAc for Manufacturing Technology of Decorative Fiberboard with Aluminum Foils[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
[4]江涛,李秀荣,谢延军,等. 微波预处理对巨尾桉木材渗透性的影响[J].西北林学院学报,2013,28(01):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
　JIANG Tao,LI Xiu-rong,XIE Yan-jun,et al. Effects of Microwave Pretreatment on the Permeability of Eucalyptus grandis×Eucalyptus urophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
[5]牛晓霆,王逢瑚,曹新民. 明清家具匠师原木下料的工艺原则及措施[J].西北林学院学报,2013,28(01):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
　NIU Xiao-ting,WANG Feng-hu,CAO Xin-min. Techniques and Principles of Log Cuttings of Furniture Makers in Ming and Qing Dynasties[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
[6]吕金阳,覃卓凯,舒辉,等. 银杉木材构造美学价值[J].西北林学院学报,2013,28(01):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
　LV Jin-yang,QIN Zhuo-kai,SHU Hui,et al. Esthetical Values in Wood Structure of Cathaya argyrophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
[7]杨艳红,张海敏,孙景荣. 基于传统文化视角的现代家具设计探析[J].西北林学院学报,2013,28(01):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
　YANG Yan-hong,ZHANG Hai-min,SUN Jing-rong. Study of Modern Furniture Design Based on Traditional Culture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
[8]黄圣游,叶喜. 新中式家具“中式”传统的界定[J].西北林学院学报,2013,28(01):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
　HUANG Sheng-You,YE Xi. Definition of Traditional Element in New Chinese Style Furniture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
[9]韩维生,赵明磊,王宏斌. 基于阈限理论的设计尺度体系[J].西北林学院学报,2013,28(01):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
　HAN Wei-sheng,ZHAO Ming-lei,WANG Hong-bin. Design Scale System Based on Threshold Theory[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
[10]宋杰,侯建军,申黎明. 按摩椅按摩头包覆层对按摩舒适性的影响[J].西北林学院学报,2013,28(01):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
　SONG Jie,HOU Jian-jun,SHEN Li-ming. Influence of Massager Coat Layer of Massage Chairs on the Degree of Comfort[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(5):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]

备注/Memo

备注/Memo:
 收稿日期：2018-11-02修回日期：2018-12-06
基金项目：云南省自然科学基金（2017FD106）。
作者简介：汤正捷，男，讲师，博士在读，研究方向：木质复合材料、植物纤维增强。E-mail:zhengjietang@163.com
更新日期/Last Update: