[1]李素瑕,张海洋,程良松,等. 毛竹销（钉）的高速旋转摩擦焊接性能研究[J].西北林学院学报,2021,36(4):225-232.[doi:10.3969/j.issn.1001-7461.2021.04.33]
　LI Su-xia,ZHANG Hai-yang,CHENG Liang-song,et al. Bonding Properties of Bamboo Dowel (Nail) Welded to Wood with High Speed Rotation[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2021,36(4):225-232.[doi:10.3969/j.issn.1001-7461.2021.04.33]
点击复制

 毛竹销（钉）的高速旋转摩擦焊接性能研究()
分享到：

《西北林学院学报》[ISSN:1001-7461/CN:61-1202/S]

卷:
第36卷
期数:
2021年第4期
页码:
225-232
栏目:
出版日期:
2021-07-31

文章信息/Info

Title:
 Bonding Properties of Bamboo Dowel (Nail) Welded to Wood with High Speed Rotation
文章编号:
1001-7461(2021)04-0225-08
作者:
 李素瑕1; 2; 张海洋1; 程良松1; 鞠泽辉1; 卢晓宁1*
 （1.南京林业大学 材料科学与工程学院，江苏 南京 210037；2.中南林业科技大学 家具与艺术设计学院，湖南 长沙 410004）
Author(s):
 LI Su-xia1; 2; ZHANG Hai-yang1; CHENG Liang-song1; JU Ze-hui1; LU Xiao-ning1*
 (1.College of Materials Science and Engineering,Nanjing Forestry University,Nanjing 210037,Jiangsu,China; 2.College of Furniture and Art Design,Central South University of Forestry and Technology,Changsha 410004,Hunan,China）
关键词:
 ; 竹销; 木材焊接; 抗拔强度; 直径比; 温度监测
Keywords:
 ; bamboo dowel;  wood welding;  tensile strength;  diameter ratio;  temperature monitoring
分类号:
S795.7
DOI:
10.3969/j.issn.1001-7461.2021.04.33
文献标志码:
A
摘要:
 选取毛竹销钉替代木榫在1 500 r/min的情况下与榉木基材进行旋转摩擦焊接，对其抗拉强度和焊接机理进行研究。重点研究不同形状的预钻孔和不同榫径与孔径比值下的竹销钉焊接抗拉拔强度，并将其与木榫焊接和PVAc胶接的抗拉强度进行对比。结果表明：1）当采用恒定直径孔10/9、10/8、10/7、10/6 4种榫径/孔径比的焊接强度均高于PVAc胶接强度，但低于木荷榫和榉木榫的焊接强度，其中10/8的榫径/孔径比的焊接强度相对最高，达到了5.54 MPa；2）当采用渐变直径孔，竹销钉的焊接强度得到明显提高。其中10/8-6的榫径/渐变孔径比值取得了最高的焊接强度，达到6.42 MPa，比10/8比值的强度提高了15.6%，超过了木荷榫的焊接强度，但不及榉木榫的焊接强度；通过对竹销钉的焊接界面温度进行监测，发现焊接界面能在2 s内达到300℃以上的峰值高温，且维持了一定的高温时间（通常约2～3 s），随后随着竹销停止旋转摩擦，温度逐步下降；不同的榫径与孔径比值下，焊接界面的升温速率、峰值温度和高温持续的时间不同，它们是产生强度差异的主要原因；SEM观察结果显示，竹销旋转摩擦焊接界面由竹销或基材中的胞间层物质软化、熔化和流动并与作为增强材料的竹纤维包裹，形成了犹如“钢筋水泥土”结构般的致密、连续和坚固的焊接界面；FTIR分析结果表明，摩擦产生的高温会导致竹销中半纤维素发生一定程度的降解，纤维素的降级十分有限，木质素发生一定程度的缩合反应，木质素的含量相对提高。试验结果表明，将竹销钉代替木榫用于木材的旋转摩擦焊接是可行的。
Abstract:
 In this investigation,the moso bamboo (Phyllostachys pubescens) dowel was selected to replace the wood dowel welded with wood substrate by high-speed rotation,and the tensile strength and welding mechanism of bamboo dowel were studied.The results show that 1) for the cylindrical shape pre-drilled hole,the tensile strength of bamboo dowel welded joints of the dowel/hole diameter ratio of 10/9,10/8,10/7 and 10/6 were all higher than that of PVAc-glued joints,but lower than that of Schima dowel and Beech dowel rotational welded joints.And the welding strength of 10/8 dowel/hole diameter ratio was the highest which reached to 5.54 MPa.2) For the truncated conical shape pre-drilled hole,the welding effect was obviously enhanced.The welding strength of 10/8-6 dowel/hole diameter ratio reached to 6.42 MPa,which was even slightly higher than that of Schima dowel welding.The results of temperature monitoring and SEM showed that,due to the temperature-induced softening and flowing of some amorphous,cells-interconnecting polymer material (mainly lignin and hemicellulose) in the structure of the bamboo and the bamboo fibers (mainly vascular bundles) were wrapped to form a dense continuous bonding layer,similar to the reinforced cement soil,thus producing a good bonding effect.FT-IR analyses showed that the high temperature led to the degradation of some hemicelluloses and the relative content of lignin increased in the welding interface,and finally improved the bonding properties.The results showed that moso bamboo dowel as an excellent wooden material,was a good substitute for wood dowel in wood friction welding.

相似文献/References:

[1]李亚藏,梁彦兰,王庆成. 铅对山梨和山荆子光合作用和叶绿素荧光特性的影响[J].西北林学院学报,2012,27(05):21.
　LI Ya-cang,LIANG Yan-lan,WANG Qing-cheng. Influence of Pb on Photosynthesis and Chlorophyll Fluorescence Characteristics in Pyrus ussuriensis and Malus baccata [J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(4):21.
[2]张小咏,李佳,杨艳昭,等. 基于SWAT模型的长江源区径流模拟[J].西北林学院学报,2012,27(05):38.
　ZHANG Xiao-yong,LI Jia,YANG Yan-zhao,et al. Runoff Simulation of the Catchment of the Headwaters of the Yangtze River Based on SWAT Model[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(4):38.
[3]杨红旗,陈广辉,王金林. PVAc改性酚醛树脂制备铝木复合材料研究[J].西北林学院学报,2013,28(01):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
　YANG Hong-qi,CHEN Guang-hui,WANG Jin-lin. PF Adhesive Modified by PVAc for Manufacturing Technology of Decorative Fiberboard with Aluminum Foils[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(4):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
[4]江涛,李秀荣,谢延军,等. 微波预处理对巨尾桉木材渗透性的影响[J].西北林学院学报,2013,28(01):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
　JIANG Tao,LI Xiu-rong,XIE Yan-jun,et al. Effects of Microwave Pretreatment on the Permeability of Eucalyptus grandis×Eucalyptus urophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(4):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
[5]牛晓霆,王逢瑚,曹新民. 明清家具匠师原木下料的工艺原则及措施[J].西北林学院学报,2013,28(01):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
　NIU Xiao-ting,WANG Feng-hu,CAO Xin-min. Techniques and Principles of Log Cuttings of Furniture Makers in Ming and Qing Dynasties[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(4):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
[6]吕金阳,覃卓凯,舒辉,等. 银杉木材构造美学价值[J].西北林学院学报,2013,28(01):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
　LV Jin-yang,QIN Zhuo-kai,SHU Hui,et al. Esthetical Values in Wood Structure of Cathaya argyrophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(4):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
[7]杨艳红,张海敏,孙景荣. 基于传统文化视角的现代家具设计探析[J].西北林学院学报,2013,28(01):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
　YANG Yan-hong,ZHANG Hai-min,SUN Jing-rong. Study of Modern Furniture Design Based on Traditional Culture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(4):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
[8]黄圣游,叶喜. 新中式家具“中式”传统的界定[J].西北林学院学报,2013,28(01):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
　HUANG Sheng-You,YE Xi. Definition of Traditional Element in New Chinese Style Furniture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(4):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
[9]韩维生,赵明磊,王宏斌. 基于阈限理论的设计尺度体系[J].西北林学院学报,2013,28(01):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
　HAN Wei-sheng,ZHAO Ming-lei,WANG Hong-bin. Design Scale System Based on Threshold Theory[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(4):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
[10]宋杰,侯建军,申黎明. 按摩椅按摩头包覆层对按摩舒适性的影响[J].西北林学院学报,2013,28(01):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
　SONG Jie,HOU Jian-jun,SHEN Li-ming. Influence of Massager Coat Layer of Massage Chairs on the Degree of Comfort[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(4):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]

备注/Memo

备注/Memo:
 收稿日期：2020-07-24修回日期：2020-08-04
基金项目：国家林业局“948”项目：竹木无胶胶合（焊接）与构件制造技术（2015-4-57）；2014国际技术转移或联合研发项目（YZ2014131）；南京林业大学林业资源高效利用协调创新中心；江苏省高校优势学科建设工程资助项目（PAPD）；中南林业科技大学与欧派家居集团产学研合作项目。
作者简介：李素瑕，博士在读，讲师。研究方向：木质复合工程材料。E-mail:lisuxia@yeah.net
*通信作者：卢晓宁，博士生导师，教授。研究方向：木质复合工程材料。E-mail:luxiaoning-nfu@126.com
更新日期/Last Update: