[1]朱云,黄琼涛,孙宏南,等. 稻秸秆板与偏心连接件的接合性能分析[J].西北林学院学报,2014,29(02):221-225.[doi:doi:10.3969/j.issn.1001-7461.2014.02.40]
　ZHU Yun,HUANG Qiong-tao,SUN Hong-nan,et al. Bonding Properties of Rice-straw Particleboard and Eccentric Fittings[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2014,29(02):221-225.[doi:doi:10.3969/j.issn.1001-7461.2014.02.40]
点击复制

 稻秸秆板与偏心连接件的接合性能分析()
分享到：

《西北林学院学报》[ISSN:1001-7461/CN:61-1202/S]

卷:
第29卷
期数:
2014年02期
页码:
221-225
栏目:
出版日期:
2014-03-30

文章信息/Info

Title:
 Bonding Properties of Rice-straw Particleboard and Eccentric Fittings
文章编号:
1001-7461（2014）-02-00221-05
作者:
 朱云1; 3; 黄琼涛2; 孙宏南2; 于娜1; 朱芋锭1; 申黎明1*
 （1.南京林业大学家具与工业设计学院，江苏南京210037；2.梅州市汇胜木制品有限公司，广东梅州514600；3.广东石油化工学院艺术设计系，广东茂名525000）
Author(s):
 ZHU Yun1; 3; HUANG Qiong-tao2;  SUN Hong-nan2 ;  YU Na1;  ZHU Yu-ding1; SHEN Li-ming1*
 (1. College of Furniture and Industrial Design , NFU, Nanjing, Jiangsu 210037,China; 2. Meizhou Huisheng Wood Products Co., Ltd, Meizhou, Guangdong 514600,China; 3. Department of Art Design, GDUPT, Maoming, Guangdong 525000,China)
关键词:
 ; 稻秸秆板; 接合方式; 接合性能; 偏心连接件
Keywords:
 ; rice-straw particleboard;  eccentric fitting;  joint mode;  bonding property
分类号:
TS653
DOI:
doi:10.3969/j.issn.1001-7461.2014.02.40
文献标志码:
A
摘要:
 稻秸秆板是一种新型环保板材，其与偏心连接件的接合性能直接影响到家具的强度和刚度。在不同螺杆长度（24 mm和34 mm）和不同接合方式（L型和T型）的条件下，利用加载的试验方法研究偏心连接件与稻秸秆板的极限载荷和刚性效率，进而分析其接合性能。同时，采用刨花板和中纤板等基材作对照组，以期从板材结构上探讨偏心连接件与稻秸秆板的接合特性。试验发现，在同等条件下稻秸秆板与偏心连接件的接合性能并不比一般的刨花板和中纤板板材差，尤其是采用34 mm螺杆和T型接合时，稻秸秆板接点的接合性能更好。
Abstract:
 Rice-straw particleboard (RSP) is a new kind of environment-friendly panel. The strength and rigidity of furniture which is made by RSP are directly related to the connection properties of the eccentric fittings. Under different screw lengths (24 mm&34 mm) and joint modes (L type &T type ), load test method was adopted to study ultimate load and rigidity efficiency of eccentric fittings and RSP, and to analyze the joint properties. Particle board (PB) and medium density fiber board (MDF) were used as control groups to analyze the joint properties between eccentric fittings and RSP from the view of plate structure. It was observed that under the same conditions, the bonding performances of RSP and eccentric fittings were as good as those of PB and MDF. The joint performance of RSP was even better than those of PB and MDF when adopting the 34 mm screw and T-junction.

参考文献/References:

 [1]申黎明,朱云.稻草板与尼龙预埋螺母接合的抗拔性能[J].南京林业大学学报,2011,35(4):79-82.SHEN L M, ZHU Y.Drawing strength of nylon embed screw nuts jointed with strawboard[J]. Journal of Nanjing Forestry University,2011,35(4):79-82.(in Chinese)
[2]司传领.板式家具角部接合性能的研究[D].哈尔滨:东北林业大学,2002.
[3]崔戌娟.板式家具偏心连接件接合性能研究[D].南京:南京林业大学，2006.
[4]LI X J.Selected properties of particleboard panels manufactured from rice straws of different geometries[J].Bioresource Technology,2010 (101):4662-4666.
[5]ALI NACI TANKUT, NURGUL TANKUT.Evaluation the effects of edge banding type and thickness on the strength of corner joints in case-type furniture[J]. Materials and Design,2010 (31): 2956-2963.
[6]关惠元.板式家具结构—五金连接件及应用[J].家具,2007(4):59-69.GUAN H Y. The structure of RTA furniture—the joint and application of hardware[J].Furniture ,2007(4): 59-69. (in Chinese) 
[7]王道静,吴智慧.无框蜂窝板板式家具五金连接件的开发与应用[J].林产工业,2009,36(1): 50-52.WANG D J,WU Z H. Development and application of the hardware for frame free cellular board furniture[J].China Forest Products Industry,2009,36(1): 50-52. (in Chinese)
[8]海福乐五金（中国）有限公司.更易于安装的新偏心连接件[J].家具,2012(6): 74-75.
[9]柳万千.家具力学[M].哈尔滨:东北林业大学出版社,1993.
[10] 董宏敢,邵卓平.接合方式对板式家具搁板承载力的影响[J].西北林学院学报,2007,22(5):161-163.DONG H G, SHAO Z P. Influence of the shelf connected style on carrying capacity in panel furniture[J]. Journal of Northwest Forestry University,2007,22(5):161-163. (in Chinese)
[11]何风梅,沈隽,鲍含伦.有限单元法在板式家具强度分析中的应用[J].西北林学院学报,2008,23(2):157-159.HE F M, SHEN J, BAO H L.FEM application in strength analysis of panel furniture[J]. Journal of Northwest Forestry University,2008,23(2):157-159. (in Chinese)
[12]黄圣游,吴智慧,李琴.重组竹家具椭圆榫接合性能研究[J].林业科技开发,2011,25(2):40-44.HUANG S Y, WU Z H,LI Q. Study on joint property of oval-tenon of reconstituted bamboo furniture[J].China Forest Science and Technology,2011,25(2):40-44. (in Chinese)
[13]蔡绍祥,向仕龙.板式家具五金件连接的力学性能研究[J].木材加工机械,2006(2): 14-17.CAI S X，XIANG S L. Study on mechanical capability of hardware-joint in panel-furniture[J].Wood Processing Machine ,2006(2): 14-17. (in Chinese)
[14]孙德林.板式家具的接合与装配技术[J].林产工业,2004,31(4): 44-46.SUN D L. Assembling and fixing technology of modern panel furniture[J]. China Forest Products Industry ,2004,31(4): 44-46. (in Chinese)
[15]赵艳,杨红梅.板式家具胶合与接合技术研究[J].林业机械与木工设备,2008,36(7): 47-48.ZHAO Y，YANG HM. Study on the gluing and mounting technology of the knockdown furniture[J]. Forestry Machinery & Wood Working Equipment,2008,36(7): 47-48. (in Chinese)

相似文献/References:

[1]李亚藏,梁彦兰,王庆成. 铅对山梨和山荆子光合作用和叶绿素荧光特性的影响[J].西北林学院学报,2012,27(05):21.
　LI Ya-cang,LIANG Yan-lan,WANG Qing-cheng. Influence of Pb on Photosynthesis and Chlorophyll Fluorescence Characteristics in Pyrus ussuriensis and Malus baccata [J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(02):21.
[2]张小咏,李佳,杨艳昭,等. 基于SWAT模型的长江源区径流模拟[J].西北林学院学报,2012,27(05):38.
　ZHANG Xiao-yong,LI Jia,YANG Yan-zhao,et al. Runoff Simulation of the Catchment of the Headwaters of the Yangtze River Based on SWAT Model[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(02):38.
[3]杨红旗,陈广辉,王金林. PVAc改性酚醛树脂制备铝木复合材料研究[J].西北林学院学报,2013,28(01):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
　YANG Hong-qi,CHEN Guang-hui,WANG Jin-lin. PF Adhesive Modified by PVAc for Manufacturing Technology of Decorative Fiberboard with Aluminum Foils[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(02):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
[4]江涛,李秀荣,谢延军,等. 微波预处理对巨尾桉木材渗透性的影响[J].西北林学院学报,2013,28(01):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
　JIANG Tao,LI Xiu-rong,XIE Yan-jun,et al. Effects of Microwave Pretreatment on the Permeability of Eucalyptus grandis×Eucalyptus urophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(02):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
[5]牛晓霆,王逢瑚,曹新民. 明清家具匠师原木下料的工艺原则及措施[J].西北林学院学报,2013,28(01):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
　NIU Xiao-ting,WANG Feng-hu,CAO Xin-min. Techniques and Principles of Log Cuttings of Furniture Makers in Ming and Qing Dynasties[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(02):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
[6]吕金阳,覃卓凯,舒辉,等. 银杉木材构造美学价值[J].西北林学院学报,2013,28(01):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
　LV Jin-yang,QIN Zhuo-kai,SHU Hui,et al. Esthetical Values in Wood Structure of Cathaya argyrophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(02):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
[7]杨艳红,张海敏,孙景荣. 基于传统文化视角的现代家具设计探析[J].西北林学院学报,2013,28(01):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
　YANG Yan-hong,ZHANG Hai-min,SUN Jing-rong. Study of Modern Furniture Design Based on Traditional Culture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(02):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
[8]黄圣游,叶喜. 新中式家具“中式”传统的界定[J].西北林学院学报,2013,28(01):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
　HUANG Sheng-You,YE Xi. Definition of Traditional Element in New Chinese Style Furniture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(02):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
[9]韩维生,赵明磊,王宏斌. 基于阈限理论的设计尺度体系[J].西北林学院学报,2013,28(01):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
　HAN Wei-sheng,ZHAO Ming-lei,WANG Hong-bin. Design Scale System Based on Threshold Theory[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(02):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
[10]宋杰,侯建军,申黎明. 按摩椅按摩头包覆层对按摩舒适性的影响[J].西北林学院学报,2013,28(01):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
　SONG Jie,HOU Jian-jun,SHEN Li-ming. Influence of Massager Coat Layer of Massage Chairs on the Degree of Comfort[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(02):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]

备注/Memo

备注/Memo:
 收稿日期：2013-07-23 修回日期：2013-10-21
基金项目：国家林业局合作项目“环境友好型秸秆板家具制造技术推广”([2012]53)。
作者简介：朱云，男，讲师，在读博士，研究方向：家具设计及室内设计。E-mail:zhuyun0911@163.com
*通信作者：申黎明，男，教授，博士。研究方向：家具设计、室内设计及人体工程学。E-mail:shenlimingda@hotmail.com
更新日期/Last Update: