参考文献/References:
[1]谭守侠,周定国.木材工业手册[M].北京:中国林业出版社, 2007.
[2]孙静,吴智慧,黄秋陆，等. 层积材家具造型设计初探[J].西北林学院学报,2012,27(1):251-254.
SUN J, WU Z H, HUANG Q L, et al. Modeling design of laminated veneer lumber furniture [J]. Journal of Northwest Forestry University, 2012, 27(1): 251-254. (in Chinese)
[3]卢杰.家具产业集群竞争力比较研究[D]. 南昌,南昌大学,2009.
[4]顾东兰,张毕蒙,朱一辛.单板冷冻预处理对杨木LVL性能的影响[J].林业科技开发，2007,21(1):56-58.
GU D L, ZHANG B M, ZHU Y X. The influence of pre-freezing of veneer on properties of poplar LVL [J]. China Forestry Science and Technology, 2007, 21(1): 56-58. (in Chinese)
[5]朱一辛,关明杰,李燕文，等.杨木单板的湿热处理对单板层积材性能的影响[J].林业科技,2008, 33(1):40-43.
[6]INOUE M, KAWAIS, WALINDER M, et al. Dimensional stabilization of compressed laminated veneer lumber by hot pressing in an airtight frame [J]. Wood Material Science and Engineering, 2008(3/4): 119-125.
[7]YI X, KINOSHITA N, YOSHINOBU M, et al. Sugi rotary veneers compressed by hygro-thermal treatment with an airtight device using moisture in the veneers [J]. Materials Science, 2004, 53(6): 686-691.
[8]KAMKE F A. Densified radiate pine for structural composites [J]. Maderas: Cienc. Tecnol., 2006, 8(2): 83-92.
[9]李文定,张洋,阮重坚，等.杨木单板的压缩与树脂浸渍处理对胶合板性能的影响[J].林产工业,2010,37(6):10-13.
LI W D, ZHANG Y, RUAN C J, et al. Influence of poplar veneer compression and impregnation on properties of poplar plywood [J]. China Forest Products Industry, 2010, 37(6):10-13. (in Chinese)
[10]陈琛,范祥林,邓玉和,等.密实化杨木单板的研究[J].浙江农林大学学报, 2013,30(4):536-542.
CHEN C, FAN X L, DENG Y H, et al. Densification of poplar veneer [J]. Journal of Zhejiang A & F University, 2013, 30(4): 536-542. (In Chinese)
[11]宋明鑫,王石建,高婧,等.单板热压后密度模型研究[J].南京林业大学学报:自然科学版,2012, 36(4):112-114.
SONG M X, WANG S J, GAO J. Research on the density model of the pressed veneer [J].Journal of Nanjing Forestry University:Natural Science Edition, 2012, 36(4): 112-114. (in Chinese)
[12]WANG B J, DAI C. Hot-pressing stress graded aspen veneer for laminated veneer lumber (LVL) [J]. Holzforchung, 2005, 59(1): 10-17.
[13]卢晓宁,陈宇聪,陈颖. 速生杨木单板顺纹弹性模量预测模型[J].南京林业大学学报,2002,26(3):9-13.
LU X N, CHEN X C, CHEN Y. The prediction of elastic modulus along the grain of poplar veneer [J]. Journal of Nanjing Forestry University, 2002, 26(3): 9-13. (in Chinese)
[14]许斌,张齐生,蒋身学,等.改性单板力学性能研究[J].南京林业大学学报：自然科学版,2010,34(4):37-41.
XU B, ZHANG Q S, JIANG S X, et al. Study on mechanical properties of modified veneer [J]. Journal of Nanjing Forestry University ：Natural Science Edition, 2010, 34(4): 37-41. (in Chinese)
[15]刘红玲,郭康权,FREDERICK A,等. 一种新型速生材单板改性技术——密闭环境下的高温饱和蒸汽软化和横向压缩处理[J].林业科学,2014,50(1): 149-155.
LIU H L, GUO K Q, KAMKE F A, et al. A novel modification technology of fast-growing wood veneers: softening at high temperature with saturated steam and transverse compression in a sealed environment [J]. Scientia Silvae Sinicae, 2014, 50(1): 149-155. (in Chinese)
[16]KAMKE F A, LEE J N. Adhesive penetration in wood—a review [J]. Wood Fiber Sci., 2007 39(2): 205-220.
[17]SIMSEK H, BAYSAL E, YILMAZ M, et al. Some mechanical properties of wood impregnated with environmentally-friendly boron and copper based chemicals [J].Wood Research, 2013,58(3): 495-504.
[18]卫佩行,黄思维,周定国.马尾松单板脱脂处理前后性能的变化[J].西南林业大学学报,2012,32(4):86-89.
WEI P X, HUANG S W, ZHOU D G. Study on property change of Pinus massoniana veneer before and after degreasing treatment [J].Journal of Southwest Forestry University, 2012, 32(4): 86-89. (in Chinese)
[19]LLOYD R A, STAMM A J. Effect of resin treatment and compression upon the weathering properties of veneer laminates [J].Forest Product. J., 1985, 8 (8): 230-235.
[20]徐咏兰,华毓坤.不同结构杨木单板层积材的蠕变和抗弯性能[J].木材工业,2002,16(6):10-12.
XU Y L, HUA Y K. Creep behavior and bending properties of poplar LVL in different assembly types [J]. China Wood Industry, 2002, 16(6): 10-12. (in Chinese)
[21]COLAKOGLU G, SEMRA C, AYDIN I, et al. Effect of boric acid treatment on mechanical properties of laminated beech veneer lumber [J]. Silva Fennica, 2003, 37(4): 505-510.
[22]CHUI Y H, SCHNEIDER M H, ZHANG H J. Effects of resin impregnation and process parameters on some of poplar LVL[J]. Forest Product. J., 1994, 44(7): 74-78.
[23]张占宽,刘君良.密实型杨木强化单板层积材的制造工艺及应用前景分析[J].林业机械与木工设备,2005,33(7):15-17.
ZHANG Z K, LIU J L. A study on the manufacturing technology of poplar compressed strengthened LVL and the analysis of its application prospect [J].Forestry Machinery & Woodworking Equipment, 2005, 33(7): 15-17. (in Chinese)
[24]WANG B J, CHUI Y. Performanceevaluation of PF resin impregnated veneer and LVL[J]. Wood Fiber Sci.,2012,44(1):1-9.
[25]WANG B J, CHUI Y. Manufacturing of LVL using cost-effective resin impregnation and lay up technologies[J]. Wood Scienceand Technology, 2012,46(6):1043-1059.
[26]刘焕荣,刘君良,柴宇博.树脂浸渍量对杨木单板层积材性能的影响[J].木材工业,2007,21(3):11-13.
LIU H R, LIU J L, CHAI Y B. Effect of the amount of resin impregnation of the properties of poplar LVL [J]. China Wood Industry, 2007, 21(3): 11-13. (in Chinese)
[27]H’NG P, CHAI K, CHIN P, et al. Urea formaldehyde impregnated oil palm trunk as the core layer for three-layered board [J]. Materials and Design, 2013, 50: 457-462.
[28]吴盛富.浅析单板层积材在我国的应用和发展[J].人造板通讯,2003,10(2):6-9.
[29]张心安,朱一辛.单板层积材的研究与发展现状[J].中国林业产业,2005(4):26-28.
[30]JAIN J D, SANYAL S N, DANGWAL M N. A note on sandwich constructions from forest based materials [J]. Journal of the Indian Academy of Wood Science, 1993, 24(1): 25-30.
[31]蒋身学,朱一辛,张齐生.竹木复合层积材结构及其性能[J].南京林业大学学报:自然科学版,2002,26(6):10-12.
JIANG S X, ZHU Y X, ZHANG Q S. The structure and properties of laminated bamboo-wood composite lumber [J]. Journal of Nanjing Forestry University:Natural Sciences Edition, 2002, 26(6):10-12. (in Chinese)
[32]朱一辛,关明杰,张晓冬.竹材增强杨木单板层积材冲击性能的研究[J].南京林业大学学报：自然科学版,2005,29(6):99-102.
ZHU Y X, GUAN M J, ZHANG X D. Studies on impact performance of bamboo strengthened laminated veneer lumber of poplar [J]. Journal of Nanjing Forestry University：Natural Sciences Edition, 2005, 29(6): 99-102. (in Chinese)
[33]刘焕荣.浸渍法生产竹木复合强化单板层积材工艺研究[D].北京:中国林业科学研究院,2007.
[34]张心安.湿热条件下竹材增强单板层积材力学性能的研究[D].南京:南京林业大学,2005.
[35]王小青,刘君良,张双保，等.竹木复合单板层积材制备工艺[J].木材工业,2005,19(5):7-9.
WANG X Q, LIU J L, ZHANG S B, et al. Processing technology of strengthened bamboo/wood composite LVL [J]. China Wood Industry, 2005, 19(5): 7-9. (in Chinese)
[36]WANG X P, ROSS R J, BRASHAW B K, et al. Flexural properties of laminated veneer lumber manufactured from ultrasonically rated red maple veneer: a pilot study[R]. Res Pap. FPL-RN-0288. Madison, W I. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 2003：5.
[37]KRETSCHMANN D E, MOODY RC, PELLERIN RF, et al. Effect of Various Proportions of Juvenile Wood on Laminated Veneer Lumber[R].Res Pap. FPL-RN-521. Madison, W I. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 1993：30.
[38]H’NG P S, PARIDAH M T, CHIN K L. Bending properties of laminated veneer lumber produced from Keruing (Dipterocarpus sp.) reinforced with low density wood species [J]. Asian Journal of Scientific Research, 2010, 3(2): 118-125.
[39]DING W E, ABDUL-KADER R, KAWAI S. Properties of rubberwood LVL reinforced with Acacia veneers [J]. Wood Research, 1996, 83: 8-16.
[40]沙洲,朱晓冬.FRP材料增强木结构研究综述[J].森林工程,2012,28(3):57-60.
SHA Z, ZHU X D. Literature review of the research on wood structure strengthened by FRP [J]. Forest Engineering, 2012, 28(3): 57-60. (in Chinese)
[41]王国超.玻璃纤维增强水泥模板的研究[J].林产工业,1996, 23(3):5-7.
[42]魏延霞.玻璃纤维增强圆筒形单板层积材的性能研究[D].哈尔滨:东北林业大学,2005.
[43]贺微粒,焦健,彭立民,等.玻璃纤维布强化杨木胶合板模板研究[J].木材工业,2007,2:13-15.
HE W L, JIAO J, PENG L M, et al. A study on glass-fiber cloth reinforced poplar plywood for concrete forms [J]. China Wood Industry, 2007, 2: 13-15. (in Chinese)
[44]程丽美,黄慧,朱一辛.玻璃纤维增强杨木单板层积材弯曲性能的初步研究[J].江西林业科技,2008(6):54-62.
CHENG L M, HUANG H, ZHU Y X. Study on bending of poplar LVL enhanced with glass mat [J]. Jiangxi Forestry Science and Technology, 2008(6): 54-62. (in Chinese)
[45]梅长彤,周定国.玻璃纤维增强杨木混凝土模板用胶合板研究[J].林业科技开发,2009,23(6):79-82.
MEI C T, ZHOU D G. Study on glass fiber reinforced poplar plywood used for concrete form [J]. China Forestry Science and Technology, 2009, 23(6): 79-82. (in Chinese)
[46]陈小辉.玻璃纤维增强竹材胶合板的研究[D].福州:福建农林大学,2012.
[47]徐正东.玻璃纤维增强杨木工程材料复合层板工艺研究[D]. 北京:北京林业大学,2012.
[48]赵俊石.玻璃纤维增强杨木单板复合层板结构与工艺研究[D]. 北京:中国林业科学研究院,2013.
[49]张真真.玻璃纤维增强树脂/木质复合材料界面胶合性能[D]. 南京:南京林业大学,2013.
[50]李世宏,徐永红,李宝华.碳纤维布增强杨木LVL梁、柱试验研究[J].江苏建筑,2007(6):13-17.
LI S H, XU Y H, LI B H. Experimental study on poplar LVL beam and column reinforced with CFRP sheets [J]. Jiangsu Construction, 2007(6): 13-17. (in Chinese)
[51]WEI P X, WANG BJ, ZHOU D G, et al. Mechanical properties of polar laminated veneer lumber modified by carbon fiber reinforced polymer [J]. BioResources, 2013, 8(4): 4883-4898.
相似文献/References:
[1]李亚藏,梁彦兰,王庆成. 铅对山梨和山荆子光合作用和叶绿素荧光特性的影响[J].西北林学院学报,2012,27(05):21.
LI Ya-cang,LIANG Yan-lan,WANG Qing-cheng. Influence of Pb on Photosynthesis and Chlorophyll Fluorescence Characteristics in Pyrus ussuriensis and Malus baccata [J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(01):21.
[2]张小咏,李佳,杨艳昭,等. 基于SWAT模型的长江源区径流模拟[J].西北林学院学报,2012,27(05):38.
ZHANG Xiao-yong,LI Jia,YANG Yan-zhao,et al. Runoff Simulation of the Catchment of the Headwaters of the Yangtze River Based on SWAT Model[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2012,27(01):38.
[3]杨红旗,陈广辉,王金林. PVAc改性酚醛树脂制备铝木复合材料研究[J].西北林学院学报,2013,28(01):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
YANG Hong-qi,CHEN Guang-hui,WANG Jin-lin. PF Adhesive Modified by PVAc for Manufacturing Technology of Decorative Fiberboard with Aluminum Foils[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(01):170.[doi:10.3969/j.issn.1001-7461.2013.01.34]
[4]江涛,李秀荣,谢延军,等. 微波预处理对巨尾桉木材渗透性的影响[J].西北林学院学报,2013,28(01):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
JIANG Tao,LI Xiu-rong,XIE Yan-jun,et al. Effects of Microwave Pretreatment on the Permeability of Eucalyptus grandis×Eucalyptus urophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(01):174.[doi:10.3969/j.issn.1001-7461.2013.01.35]
[5]牛晓霆,王逢瑚,曹新民. 明清家具匠师原木下料的工艺原则及措施[J].西北林学院学报,2013,28(01):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
NIU Xiao-ting,WANG Feng-hu,CAO Xin-min. Techniques and Principles of Log Cuttings of Furniture Makers in Ming and Qing Dynasties[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(01):178.[doi:10.3969/j.issn.1001-7461.2013.01.36]
[6]吕金阳,覃卓凯,舒辉,等. 银杉木材构造美学价值[J].西北林学院学报,2013,28(01):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
LV Jin-yang,QIN Zhuo-kai,SHU Hui,et al. Esthetical Values in Wood Structure of Cathaya argyrophylla[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(01):183.[doi:10.3969/j.issn.1001-7461.2013.01.37]
[7]杨艳红,张海敏,孙景荣. 基于传统文化视角的现代家具设计探析[J].西北林学院学报,2013,28(01):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
YANG Yan-hong,ZHANG Hai-min,SUN Jing-rong. Study of Modern Furniture Design Based on Traditional Culture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(01):188.[doi:10.3969/j.issn.1001-7461.2013.01.38]
[8]黄圣游,叶喜. 新中式家具“中式”传统的界定[J].西北林学院学报,2013,28(01):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
HUANG Sheng-You,YE Xi. Definition of Traditional Element in New Chinese Style Furniture[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(01):192.[doi:10.3969/j.issn.1001-7461.2013.01.39]
[9]韩维生,赵明磊,王宏斌. 基于阈限理论的设计尺度体系[J].西北林学院学报,2013,28(01):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
HAN Wei-sheng,ZHAO Ming-lei,WANG Hong-bin. Design Scale System Based on Threshold Theory[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(01):197.[doi:10.3969/j.issn.1001-7461.2013.01.40]
[10]宋杰,侯建军,申黎明. 按摩椅按摩头包覆层对按摩舒适性的影响[J].西北林学院学报,2013,28(01):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
SONG Jie,HOU Jian-jun,SHEN Li-ming. Influence of Massager Coat Layer of Massage Chairs on the Degree of Comfort[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2013,28(01):202.[doi:10.3969/j.issn.1001-7461.2013.01.41]
[11]周志茹,赵茂程*,王正,等. 基于应力波的意杨原木、单板及LVL弹性模量相关性研究[J].西北林学院学报,2014,29(03):188.[doi:doi:10.3969/j.issn.1001-7461.2014.03.38]
ZHOU Zhi-ru,ZHAO Mao-cheng*,WANG Zheng,et al. Correlations of the Modulus of Elasticity among Poplar Log,Veneer and LVL Based on the Stress Wave Method[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2014,29(01):188.[doi:doi:10.3969/j.issn.1001-7461.2014.03.38]
[12]饶鑫,卫佩行*,张悦,等. 家具用马尾松单板层积材力学性能的研究[J].西北林学院学报,2015,30(04):263.[doi:doi:10.3969/j.issn.1001-7461.2015.04.43]
RAO Xin,WEI Pei-xing*,ZHANG Yue,et al. Mechanical Performances of Laminated Veneer Lumber from Pinus massoniana for Furniture Manufacturing[J].JOURNAL OF NORTHWEST FORESTRY UNIVERSITY,2015,30(01):263.[doi:doi:10.3969/j.issn.1001-7461.2015.04.43]